Vibration Transmitter

Vibration AnalysisVibration Transmitter

Platinum Stock Products ICP Vibration Transmitter

DIN rail mount vibration transmitter (for use w/ICP sensor), 4-20 mA outputs for vibration and temperature, 0-5/0-10 VDC output for vibration, raw vibration output, 3 Hz to 10 kHz frequency range

Output Signal: 4 to 20 mA
Frequency Range: (-3dB)180 to 600000 CPM ( 3 to 10k Hz)
DC Power: 23 to 25 VDC

ENGLISH	SI
Performance
Channels	1	1
Input Signal (Vibration)	±100 mV/g	±10.2 mV/(m/s²)	[8]
Input Signal (Temperature)	0 to 1.2 VDC	0 to 1.2 VDC	[5]
Output Signal (DC Vibration)	4 to 20 mA	4 to 20 mA	[4]
Output Signal (DC Vibration)	0 to 5 VDC	0 to 5 VDC	[6][9]
Output Signal (Temperature)	0 to 10 VDC	0 to 10 VDC	[6][9]
Output Signal (DC Vibration)	4 to 20 mA	4 to 20 mA	[5]
Output Signal (±0.01 %) (AC Vibration)	100 mV/g	10.2 mV/(m/s²)	[1]
Frequency Range (-3 dB) (Acceleration)	180 to 600000 cpm	3 to 10k Hz	[2][10][11]
Frequency Range (-3 dB) (Velocity)	210 to 600000 cpm	3.5 to 10k Hz	[2][10][11]
Frequency Range (-3 dB) (Displacement)	210 to 60000 cpm	3.5 to 1000 Hz	[2][3][10]
Output Range (DC Acceleration)	0 to 5.00 g pk or rms	0 to 49.03 m/s2 pk or rms	[7][8][9]
Output Range (DC Acceleration)	0 to 10.00 g pk or rms	0 to 98.06 m/s2 pk or rms	[7][8][9]
Output Range (DC Acceleration)	0 to 20.00 g pk or rms	0 to 196.12 m/s2 pk or rms	[7][8][9]
Output Range (DC Velocity)	0 to 0.5 in/sec pk or rms	0 to 12.7 mm/s pk or rms	[7][8][9]
Output Range (DC Velocity)	0 to 1.00 in/sec pk or rms	0 to 25.4 mm/s pk or rms	[7][8][9]
Output Range (DC Velocity)	0 to 2.00 in/sec pk or rms	0 to 50.8 mm/s pk or rms	[7][8][9]
Output Range (DC Displacement)	0 to 10.0 mil pk – pk	0 to 0.254 mm pk – pk	[7][8][9]
Output Range (DC Displacement)	0 to 20.0 mil pk – pk	0 to 0.508 mm pk – pk	[7][8][9]
Output Range (DC Displacement)	0 to 40.0 mil pk – pk	0 to 1.02 mm pk – pk	[7][8][9]
Environmental
Temperature Range (Operating)	-13 to 158 °F	-25 to 70 °C
Temperature Range (Storage)	-40 to 257 °F	-40 to 125 °C
Humidity Range (Non-Condensing)	0 to 95 %	0 to 95 %
Electrical
Power Required	DC power	DC power
DC Power	23 to 25 VDC	23 to 25 VDC
DC Power (maximum)	100 mA	100 mA
Settling Time	<2 min	<2 min
Excitation Voltage (delivered to the sensor)	17 to 19 VDC	17 to 19 VDC	[12][13]
Constant Current Excitation (delivered to the sensor)	3 to 5 mA	3 to 5 mA	[12][13]
Output Span (±5.0 %) (DC Vibration Current Output)	16 mA	16 mA
Output Span (±5.0 %) (Temperature Output)	16 mA	16 mA
Output Span (±5.0 %) (DC Vibration Voltage Output)	5 or 10 VDC	5 or 10 VDC	[9]
Physical
Electrical Connector (input/output)	Removable Screw Terminals	Removable Screw Terminals
Electrical Connector (raw vibration output)	BNC Jack	BNC Jack
Housing Material	Polyamide	Polyamide
Size – Height	3.9 in	99 mm
Size – Width	0.9 in	22.5 mm
Size – Depth	4.5 in	114.5 mm
Weight (Maximum)	6.4 oz	127
Screw Terminal Wire Size	24-14 AWG	24-14 AWG
Din Rail Mount	1.38 in	35 mm
Status Indicator (Power “on”)	Green LED	Green LED
Status Indicator (Input Fault)	Red LED	Red LED
Status Indicator (Measurement Mode – Acceleration)	Green LED	Green LED
Status Indicator (Measurement Mode – Velocity)	Green LED	Green LED
Status Indicator (Measurement Mode – Displacement)	Green LED	Green LED

* All specifications are at room temperature unless otherwise specified

Specification Notes

[ 1] Achieved with 100 mV/g ICP® accelerometer input.
[ 2] Attenuation is -40 dB/decade.
[ 3] Maximum 1,000 Hz for displacement.
[ 4] Output current voltage will fluctuate at frequencies below 5 Hz.
[ 5] Requires use of accelerometer with “TO” temperature output option.
[ 6] Factory set, 0-5 VDC.
[ 7] Factory set, 1.0 in/sec peak
[ 8] Output measurement range is based upon input from 100 mV/g ICP® accelerometers and will be scaled inversely proportional to any percentage deviation of this input.
[ 9] Internal Dip switch selectable
[ 10] The low-frequency tolerance is accurate within ± 0.5 Hz of the specified frequency.
[ 11] The high-frequency tolerance is accurate within ± 0.5 kHz of the specified frequency.
[ 9] Internal Dip switch selectable
[ 12] Jumper selectable for 18 VDC regulated, 24 VDC power supply voltage or ICP® sensor excitation disabled
[ 13] 4 mA constant current diode is internal to 9330VT
[ 14] See PCB Declaration of Conformance PS152 for details.